|In addition to a modular design, these Power-Grip vacuum lifters provide 180 degree rotation and 90 degree tilt, for expandability and a full range of load motion at the installation site or on the shop floor.
P11104DC (for flat materials)
P11004DC (for curved materials)
P1HV1104DC (for rough materials)
Features at a glance...
|Standard Pad Spread||P11104DC: 51" x 12" [1295 x 305mm]
P11004DC: 49" x 10" [1245 x 254mm]
P1HV1104DC: 50" x 11" [1270 x 280mm]
|Number / Size of Pads||P11104DC: 4 / 11" [28 cm] dia. lipped
P11004DC: 4 / 10" [25cm] dia. concave
P1HV1104DC: 4 / 102 [25cm] dia. lipped
(On smooth, non-porous surfaces.)
|P11104DC: 700lb [320kg]
P11004DC: 600lb [270kg] (capacity is reduced on curved surfaces)
P1HV1104DC: 600lb [270kg]
|Average Unit Weight||70lb [32kg]|
|Standard Operating Power||12 volts DC, 10 amps (for each pad channel)|
|Load Movement||Manual tilt, 180 degree edgewise, with locking in three positions.
Manual tilt, 90 degree between upright and flat, with automatic latching in upright position. (units can be tilted ONLY when the lift bar is locked in the center position, as shown on diagrams)
|Standard Features||On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum Line filter
Vacuum reserve tank